Automatic water pump

Automatic water pump, a very simple and economical way to dispense natural water at ambient temperature. This automatic pump can be used by both children and adults without any complications. It is perfect to have at home or in the office to dispense water comfortably. Its compact size makes it easy to transport and change from one bottle to another without any problems.

The automatic water pump is activated by simply pressing the button on the top. Once the top button is pressed, the pump sucks the water from the bottle and serves it through the STAINLESS STEEL tap. To stop serving water, simply press the top button again. This same button is the one that activates and deactivates the operation of the water pump. It has the capacity to serve 78 litres/hour.

Each Automatic Water Pump comes with a Micro USB charging cable. The battery capacity is 1200mA which is charged via the USB cable for 3-5 hours to achieve a full charge. At the top, on the activation button, is an LED light that indicates the battery charge status. This light stays red as long as it needs to be charged and turns off when the charge is complete.

It fits over the 5-gallon bottle cap with the valve removed. The silicone tube measures 52cm and is inserted through the valve hole into the bottle. It is suitable for bottles from 11.8 to 20 litres as long as they are fitted with the 5-gallon cap.

The automatic water pump adapter makes it suitable for water bottles with necks from 38mm to 48mm. This adaptor allows the automatic pump to be used on typical supermarket water bottles between 3 and 10 litres.

It is suitable for all necks in this size range.

It is very easy to use. It is inserted into the lower part of the automatic pump with the cannula already fitted. It is fixed in this position with the ring that rotates until it engages. Afterwards, the cannula is inserted into the bottle and the adapter is attached to the neck thanks to the internal system with adjustable rubber band, until it is perfectly coupled.